Pneumatic tools, hoists and motors are used every day in a wide variety of applications. Keeping these tools running at peak performance requires attention to lubrication in the air line. Air line lubrication has always been an ignored practice in a plant’s tool maintenance program, until pneumatic system or air driven tool failures is experienced.

Anglomoil AGL is an extreme pressure multi-purpose mineral gear lubricant that meets arduous and severe working conditions by utilizing Lubrizol’s high performance sulphur phosphorus technology and enhanced by Anglomoil’s exclusive additive packages.

Short decription here short decription here short decription here short decription here short decription here short decription here short decription here short decription here short decription here.

JCHEM-211 is a smooth, semi fluid texture grease, for flexibility in applications, exceeding requirements for machinery parts using semi-fluid type lubricants. It is formulates with highly refined paraffin base oils, fortified with rust and oxidation inhibitors.

Anglomoil Chain Oil is a premium chain oil made with mineral oils, friction modifiers, anti-wear additives and tackifier. It is a high performance product suitable for chains and bars of power chain saws.

JCHEM-206 is designed specially with selected friction modifier-polymer to impact outstanding functional and safety characteristics for the lubrication of elevator guide. It contains a unique polymeric component which performs effectively by resisting squeeze-out and providing certain EP protection under severe load. It also maintains a strong lubrication film that is not easily lost through dripping and loose fittings; lubricating moving parts immediately on startup, ensuring instant lubrication at the most critical wear time. Even after the equipment remains idle for extended periods, all metal surfaces remain coated and protected.

JCHEM-210 is a low viscosity straight mineral oil intended for flushing the lubrication systems of gasoline or diesel engines. It removes sludge, gums, water, wear metals, dust, carbon, etc., when draining used engine oils. When these contaminants accumulate, it may not allow the fresh charge of oil to maximize its useful life. Flushing an engine with JCHEM-210 every oil change insures the new clean oil is at its peak.

The Compressor S/R series is a range of mineral based compressor lubricants that have been developed to meet the demands of modern rotary screw as well as reciprocating compressors.

Anglomoil HTO Heat Transfer Oil is blended from high quality mineral oils fortified with an advanced additive system. This combination of materials provides superior performance in
indirect closed heat transfer system.

Viscosity is the most important factor when selecting hydraulic oil. The viscosity of oil indicates its internal friction. The viscosity of the hydraulic oil changes with changes in temperature. A typical hydraulic pump converts approximately 20% of its horsepower into heat. Heat is the biggest enemy of a hydraulic system. Heat increased results in developing varnish deposits over time that lead to increase frictional wear and tear, excessive pressure and power loss. Anglomoil HVI contains high viscosity modifier which maintains optimum viscosity at higher temperatures maximizes hydraulic pump efficiency.